Sequential (157) Binding

https://johnchihau.blogspot.com/2026/08/httpsjohnchihau.html?m=1
. 

Ref: https://johnchihau.blogspot.com/2026/08/httpsjohnchihau.html?m=1
.

.

.

.

.

John: Before we start,  you might read this article first. https://wodewangzhishime.blogspot.com/2023/12/blog-post_14.html?m=1 .

Me: Ok. 

John : In that article,  it said the signal of the Clock line of RJ45 "Interfere" with the signal of the output of the Register. 
Me: Ok.
.

John : Fine. Turn to See the 1st picture

Me: Ok.

John: If the signal from transmitter 1 and 2 enter a frequency mixer. 2 signal will "Try their best" to mix together. 

Me: Ok.

.

John: If the signal of transmitter 1 mix with the signal of transmitter 2, that means the signal of transmitter 1 is interfered with by the signal of transmitter 2.

Me: In mobile communication, "Interference" is unaccepted.

.

John: Yes, however,  if the signal of transmitter 1 and 2 are orthogonalized, 2 signal "try their best" to seperate. 

Me: "Seperation" mean less Interference.

John : Yes,.

Me: The lesser Interference,  the better. 

John: Exactly, see the 2nd picture.  If 2 signal mix together,  it create a clock line of a single Up cycle.  If 2 signal orthogonalized,  it create a clock line of Up, down and Up cycle.

Me: Ok.

John: Now, see the 3rd picture.  When the Signal of WIFI 1, wifi 2 and WIFI 3 enter the multiplexer of our mobile phone,  they will enter 3 different route. 

1) Wifi 1 enter route 1

2) Wifi 2 enter route 2

3) Wifi 3 enter route 3
 .

John : See the 4th Pic . The mobile phone are slaves.  The Wifi are master.

Me: Therefore,  the mobile Phones used the Clock lines of the Wifi.